|
Physical |
| Dimensions: |
182 mm x 110 mm x 47 mm |
| Weight: |
1.18 kg (without power supply) |
| Detector |
|
Detector: |
Hamamatsu S7031-1006 |
| Detector range: |
200-1100 nm |
|
Pixels: |
1024 x 58 (1044 x 64 total pixels) |
|
Pixel size: |
24.576 μm2 |
|
Pixel well depth: |
1000 Ke- |
| Sensitivity: |
~0.065 counts / e- |
| Quantum efficiency: |
90% peak; 65% at 250 nm |
| Optical Bench |
| Design: |
f/4, Symmetrical crossed Czerny-Turner |
| Focal length: |
101.6 mm input and output |
| Entrance aperture: |
200 �m wide slit |
| Grating: |
HC1-QE |
| OFLV filter: |
OFLV-QE-350 (350-1100 nm) |
| Collimating and focusing mirrors: |
Standard only |
| UV enhanced window: |
No |
| Fiber optic connector: |
SMA 905 to 0.22 numerical aperture single-strand optical fiber |
| Spectroscopic |
| Wavelength range: |
350-1100 nm (grating dependent) |
| Optical resolution: |
~6 nm FWHM |
| Signal-to-noise ratio: |
1000:1 (at full signal) |
| A/D resolution: |
16 bit |
| Dark noise: |
3 RMS counts |
| Dynamic range: |
7.5 x 109 (system), 25000:1 for a single acquisition |
| Integration time: |
8 ms to 15 minutes |
| Stray light: |
<0.08% at 600 nm; 0.4% at 435 nm |
| Corrected linearity: |
>99.8% |
| Electronics |
| Power consumption: |
500 mA @ 5 VDC (no TE cooling); 3.5 A @ 5 VDC (with TE cooling) |
| Data transfer speed: |
Full scans to memory every 7 ms with USB 2.0 port, 18 ms with USB1.1 port, 300 ms with serial port |
| Inputs/Outputs: |
10 onboard digital user-programmable GPIOs (general purpose inputs/outputs) |
| Analog channels: |
No |
| Auto nulling: |
Yes |
| Breakout box compatibility: |
Yes |
| Trigger modes: |
4 modes |
| Strobe functions: |
No |
| Gated delay feature: |
Yes |
| Connector: |
30-pin connector |
| Power-up time: |
<5 seconds |
|
Dark current: |
4000 e-/pixel/sec @ 25 �C; 200 e-/pixel/sec @ 0 �C |
| Computer |
| Operating systems: |
Windows 98/Me/2000/XP, Mac OS X and Linux with USB port; Any 32-bit Windows OS with serial port |
| Computer interfaces: |
USB 2.0 @ 480 Mbps; RS-232 (2-wire) @ 115.2 K baud |
| Peripheral interfaces: |
SPI (3-wire); I2C inter-integrated circuit |
| Temperature and Thermoelectric (TE) Cooling |
| Temperature limits: |
0 �C to 50.0 �C; no condensation |
| Set point: |
Software controlled; lowest set point is 40 �C below ambient |
| Stability |
+/-0.1 �C of set temperature in <2 minutes |
